HIKVISION DS-2SE4C425MWG-E/26(F0) - 6.7.2 Image Parameters Switch

Figure 6-3 White Balance
Defog
You can enable the defog funcon when the environment is foggy and the image is misty. It
enhances the sub
tle details so that the image appears clearer.
Figure 6-4 Defog
EIS
Increase the stability of video image by using jier compensaon technology.
6.7.2 Image Parameters Switch
The device
automacally switches image parameters in set me periods.
Go to image parameters switch seng page: Conguraon → Image → Image Parameters Switch ,
and set parameters as needed.
Set Scheduled-switch
Switch the image to the linked scene mode automacally in certain me periods.
St
eps
1.
Check Scheduled-switch.
TandemVu PTZ Camera User Manual
46