HIKVISION DS-2SE4C425MWG-E/26(F0) - 4.15.1 Set Manual Compass

What to do next
If you lose direcon when operang the device, you can click Point to North to call the north
posion that is saved in the device.
4.15.1 Set Manual Compass
Use a direcon indicang device to determine the North at the device locaon, and set the North
for the device.
Before You Start
Use a direcon indicang device to determine the north at the device locaon.
Steps
1.
Select the PT Mode as Manual.
2.
Adjust the lt posion of the device to 0 by controling the up arrow and down arrow on the PTZ
panel.
3.
Adjust the pan posion to show the live view of the north direcon by controling the le arrow
and right arrow on the PTZ panel.
4.
Click Set as North.
TandemVu PTZ Camera User Manual
29