Normal Mode Sengs
Steps
1.
Oponal: Click Lock t
o lock PTZ control to prevent the interrupon from other PTZ related acon
during conguraon.
Normally, the PTZ control is automacally locked when you enter the
conguraon interface.
You can manually resume the lock when the countdown is over.
2.
Use PTZ control panel to locate a scene with a face.
3.
Click , and draw a detecon area on live image.
4.
Input or draw the min. pupil distance and the max. pupil distance.
The Min. Pupil Distance and the Max. Pupil Distance are used to improve detecon accuracy.
Only targets whose pupil distance are between the maximum distance and the minimum
distance trigger the capture.
Click and to draw the distance on live image, or input values in the text elds of Min. Pupil
Distance and Max. Pupil Distance.
5.
Click Save.
6.
Set arming schedule. See Set Arming Schedule .
7.
Set linkage method. See Linkage Method Sengs .
Expert Mode Sengs
Steps
1.
Oponal: Click Lock t
o lock PTZ control to prevent the interrupon from other PTZ related acon
during conguraon.
Normally, the PTZ control is automacally locked when you enter the conguraon interface.
You can manually resume the lock when the countdown is over.
2.
Set detecon scenes and detecon areas.
1)
Select a detecon scene.
2) Adjust the live image to a desired scene. You can use PTZ control buons to locate a scene
with a face.
3) Click
, and draw a detecon area on live image.
4)
Click Save.
5) Repeat above steps to set other detecon scenes and areas.
3.
Input or draw the min. pupil distance and the max. pupil distance.
The Min. Pupil Distance and the Max. Pupil Distance are used to improve detecon accuracy.
Only t
argets whose pupil distance are between the maximum distance and the minimum
distance trigger the capture.
Click
and to draw the distance on live image, or input values in the text elds of Min. Pupil
Dis
tance and Max. Pupil Distance.
4.
Set patrol schedule.
TandemVu PTZ Camera User Manual
10
To Next Page
Loading...
Need help?
General
