EasyManuals Logo

HIKVISION DS-2SE4C425MWG-E/26(F0) User Manual

HIKVISION DS-2SE4C425MWG-E/26(F0)
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Protocol
TCP
TCP ensures complete delivery of streaming data and beer video quality, yet the real-me
transmission will be aected. It is suitable for the stable network environment.
UDP
UDP is suitable for the unstable network environment that does not demand high video
uency.
MULTICAST
MULTICAST is suitable for the situaon that there are mulple clients. You should set the
mulcast address for them before selecon.
Note
For detailed informaon about mulcast, refer to Mulcast .
HTTP
HT
TP is suitable for the situaon that the third-party needs to get the stream from the
device.
Play Performance
Shortest Delay
The device takes the real-me video image as the priority over the video uency.
Balanced
The de
vice ensures both the real-me video image and the uency.
Fluent
The de
vice takes the video uency as the priority over teal-me. In poor network
environment, the device cannot ensures video uency even the uency is enabled.
Custom
You can set the frame rate manually. In poor network environment, you can reduce the
frame rate to get a uent live view. But the rule informaon may cannot display.
Aut
o Start Live View
Yes means the live view is started automacally. It requires a high performance monitoring
de
vice and a stable network environment.
No means the live view should be started manually.
3.
Click Save.
TandemVu PTZ Camera User Manual
34

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2SE4C425MWG-E/26(F0) and is the answer not in the manual?

HIKVISION DS-2SE4C425MWG-E/26(F0) Specifications

General IconGeneral
BrandHIKVISION
ModelDS-2SE4C425MWG-E/26(F0)
CategorySecurity Camera
LanguageEnglish

Related product manuals