115
8.5 Message List
:CALCulate:LIMit:BEEPer?
(OFF, HI or IN) Queries the beep sound setting
131
:CALCulate:LIMit:MODE
HL or REF Selects the decision mode
131
:CALCulate:LIMit:MODE?
(HL or REF) Queries the decision mode setting
131
:CALCulate:LIMit:UPPer
<Upper threshold> Sets the upper threshold
131
:CALCulate:LIMit:UPPer?
(<Upper threshold>) Queries the upper threshold setting
131
:CALCulate:LIMit:LOWer
<Lower threshold> Sets the lower threshold
131
:CALCulate:LIMit:LOWer?
(<Lower threshold>) Queries the lower threshold setting
131
:CALCulate:LIMit:REFerence
<Reference Resistance>
Sets the reference resistance
132
:CALCulate:LIMit:REFerence?
(<Reference resistance>)
Queries the reference resistance setting
132
:CALCulate:LIMit:PERCent
<Tolerance (%)> Sets the decision tolerance
132
:CALCulate:LIMit:PERCent?
(<Tolerance (%)>) Queries the decision tolerance setting
132
:CALCulate:LIMit:RESult?
(HI, IN, LO, OFF or ERR)
Queries the decision result
132
Setting and Querying BIN Measurements
:CALCulate:BIN:STATe
1, 0, ON or OFF Sets BIN measurement execution
132
:CALCulate:BIN:STATe?
(ON or OFF) Queries the BIN execution state setting
132
:CALCulate:BIN:ENABle
< Enable Mask> Sets the enable mask
133
:CALCulate:BIN:ENABle?
(<Enable Mask>) Queries the Enable Mask setting
133
:CALCulate:BIN:MODE
<BIN No.>,<HL or REF>
Sets the decision mode
133
:CALCulate:BIN:MODE?
<BIN No.>,(<HL or REF>)
Queries the decision mode setting
133
:CALCulate:BIN:UPPer
<BIN No.>,<Upper
threshold>
Sets the upper threshold
133
:CALCulate:BIN:UPPer?
<BIN No.>,(<Upper
threshold>)
Queries the upper threshold setting
133
:CALCulate:BIN:LOWer
<BIN No.>,<Lower
threshold>
Sets the lower threshold
133
:CALCulate:BIN:LOWer?
<BIN No.>,(<Lower
threshold>)
Queries the lower threshold setting
133
:CALCulate:BIN:REFerence
<BIN No.>,<Reference
resistance>
Sets the reference resistance
134
:CALCulate:BIN:REFerence?
<BIN No.> (<Reference
resistance>)
Queries the reference resistance setting
134
:CALCulate:BIN:PERCent
<BIN No.>,<Tolerance
(%)>
Sets the decision tolerance
134
:CALCulate:BIN:PERCent?
<BIN No.>,(<Tolerance
(%)>)
Queries the decision tolerance setting
134
:CALCulate:BIN:RESult?
0 to 1023 Sets the upper threshold
134
Offset Voltage Compensation function
:SYSTem:OVC
1, 0, ON or OFF
Set Offset Voltage Compensation
function execution
134
:SYSTem:OVC?
(ON or OFF)
Query Offset Voltage Compensation
function execution
134
Temperature measurement (analog input)
:SYSTem:TEMPerature:SENSor
PT or ANALog Selects the temperature sensor type
135
:SYSTem:TEMPerature:SENSor?
(PT or ANALOG)
Queries the temperature sensor type
selection
135
:SYSTem:TEMPerature:PARameter
<V1>,<T1>,<V2>,<T2> Sets the analog input scaling constants
135
Message ([ ] = optional)
Data Contents
( ) = response data
Description
Ref
page
To Next Page
Loading...
