Advanced
RM Web L3E
Release
6.0
07/2010
8.2
DHCP Server
225
Parameter Meaning Value range Default setting
Port Module and port numbers to which this
entry applies.
X For a dynamic address entry select
all.
X For a static address entry select all
or one valid module and port
number.
Valid module
and port number
or all.
all
Active Activates or deactivates the pool entry. On, Off Off
IP address X For a dynamic address entry:
the 1st address of the IP address
pool that the DHCP server is to
allocate to a client.
X For a static address entry:
the IP address that the server is
always to allocate to the same
client.
Valid IPv4
address
-
Last IP Address For a dynamic address entry:
the last address of the IP address pool
that the DHCP server is to allocate to a
client.
Valid IPv4
address
-
Table 100: DHCP server pool settings, IP address basic settings
To Next Page
Loading...
Need help?
General
