Hirschmann MACH 4000 Reference Manual

Advanced
226
8.2 DHCP Server
RM Web
Release 6.0 07/2010
–
a
A client, remote or circuit ID consists of 1 - 255 bytes in hexadecimal
form (00 - ff), separated by spaces.
Parameter Meaning Value range Default setting
Lease time [s] Time in s for which the DHCP server
allocates the address to the client.
Within the lease time, the client can
apply for an extension.
If the client does not apply for an
extension, after it has elapsed the
DHCP server takes the IP address
back into the pool and allocates it to
any client that requires it.
1 s -
4,294,967,295 s
(2
32
-1 s)
86,400 s (1 day
)
MAC Address For a static address entry:
MAC address with which the client
identifies itself.
MAC address of
the client that
contains the
static IP address
-
Gateway IP address of the DHCP relay via
which the client makes its request.
If the DHCP server receives a request
via another DHCP relay, it ignores this.
If there is no DHCP relay between the
client and the DHCP server, leave
these fields empty.
IPv4 address of
the DHCP relay.
-
Client ID For a static address entry:
Client ID with which the client identifies
itself.
Client ID of the
client that
contains the
static IP
address
a
-
Remote ID For a static address entry:
Remote ID with which the client
identifies itself.
Remote ID of the
client that
contains the
static IP
address
a
-
Circuit ID For a static address entry:
Circuit ID with which the client
identifies itself.
Circuit ID of the
client that
contains the
static IP
address
a
-
Hirschmann Device Activate this setting if the device from
this entry only serves devices from
Hirschmann.
On, Off Off
Table 101: DHCP server pool settings, mode of address allocation

Hirschmann MACH 4000 Specifications

General

Brand	Hirschmann
Model	MACH 4000
Category	Network Router
Language	English