Diagnostics
RM Web L3E
Release
6.0
07/2010
9.1
Syslog
239
Note: When you activate the logging of SNMP requests, the device sends
these as events with the preset level to report notice to the list of syslog
servers. The preset minimum level to report for a syslog server entry is
critical.
To send SNMP requests to a syslog server, you have a number of options to
change the default settings. Select the ones that meet your requirements
best.
X Set the level to report for which the device creates SNMP requests as
events to warning or error and change the minimum level to report for
a syslog entry for one or more syslog servers to the same value.
You also have the option of creating a separate syslog server entry for
this.
X Only set the level to report for SNMP requests to critical or higher.
The device then sends SNMP requests as events with the level to report
critical or higher to the syslog servers.
X Only set the minimum level to report for one or more syslog server entries
to notice or lower. Then it may happen that the device sends a large
number of events to the syslog servers.
To Next Page
Loading...
Need help?
General
