Diagnostics
RM Web L3E
Release
6.0
07/2010
9.4
Configuration Check
249
Parameter Meaning
Module Module number for modular devices, otherwise 1.
Port Port to which this entry applies.
Neighbour
System Name
System name of the neighboring device (see on page 19 “System Data“)
Neighbour IP
Address
IP address of the neighboring device with LLDP function (see on page 24
“Network“)
Neighbour Port Displays information on the neighboring device.
Neighbour Type Displays the type of the neighboring device. Written in
– Capital letters: The device has this function, and the function is
activated.
– Lower-case letters: The device has this function, and the function is
deactivated.
Status Displays the configuration status
– Green circle with checkmark: The configuration of this device and
the configuration of the neighboring device are compatible.
Communication between the two devices is okay.
– Yellow warning triangle: The configuration of this device and the
configuration of the neighboring device do not match. The
performance of the communication between the two devices could
be endangered. Select this row to obtain further information in the
window below.
– Red square with X: The configuration of this device and the
configuration of the neighboring device are not compatible.
Communication between the two devices is endangered. Select this
row to obtain further information in the window below.
– Blue circle with question mark: Configuration data is not available for
the neighboring device. Select this row to obtain further information
in the window below.
Reason If a reason is entered in a row, selecting this row displays more detailed
information on this reason in the window below.
Table 109: Configuration Check table
To Next Page
Loading...
Need help?
General
