Hitachi Compute Blade 500 Series - Page 140

Recovery and RAS sub menu
Select an item to display or set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Place the cursor on a menu to set, and press Enter.
Table 2-105 Recovery and RAS sub menu items
Menu items Selection Description
Advanced RAS - Sets the failure deconfiguration to CPU and
DIMM.
See Advanced RAS for details.
Backup Bank Management - Sets the backup management.
Disk GPT Recovery - Set the disk GPT recovery
System Recovery - Sets the system recovery.
Advanced RAS
Select an item to display or set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Select the item to display or set, and press Enter.
Table 2-106 RAS Configuration menu items
Menu items
Selection
1
Description
Machine Check Recovery • Disable
• <<Enable>>
Enable or Disable Machine Check
Recovery.
PCI Live Error Recovery
• <<Disable>>
• Enable
Enable or Disable PCI Live Error
Recovery.
PCIe Isolation
2
• <<Disable>>
• Enable
Enable or Disable PCIe Isolation.
Hardware Memory Dump
2
• <<Disable>>
• Enable
Enable or Disable Hardware Memory
Dump.
Dump Partition
2
No Present Shows Dump Partition.
Post Process
2
• <<Spinloop>>
• Reset
Sets Post Process.
Deconfigured Mode
• <<Disable>>
• Enable
Enable or Disable DIMM Deconfigured
Mode.
2-120
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide