Table 2-109 Data and Time menu items
Menu items Selection Description
System Date Increases or decreases the
setting value using [+], [-]
keys.
Sets the local date of the system. Sets the
date as mm/dd/yyyy.
System Time Increases or decreases the
setting value using [+], [-]
keys.
Sets the local time of the system. Sets the
time as hh:mm:ss in the form of 24 hours.
Start Options
Select an item to boot, and press Enter.
Select a target device to set boot, and press Enter. The target device will be
booted first.
The items to be displayed may be different depending on the setting of Boot
Manager.
For the details, see Boot Manager on page 2-123.
Boot Manager
Select an item to display or set, and press Enter.
Note: Do not change the settings of the following item. If you change the
settings in a poor attempt, UEFI may not start up.
• Boot From File
• Boot From Device
• UEFI Shell
The following table shows description of menu items displayed in the left side
of the window.
Select an item to set, and press Enter.
Table 2-110 Boot Manager menu items
Menu items Description
Primary Boot Sequence
Add Boot Option Adds a device or file system to the boot option.
See Add Boot Option sub menu on page 2-124.
Delete Boot Option Deletes a device or file system from the boot option, which is
enabled in the next boot.
See Delete Boot Option sub menu on page 2-125.
Change Boot Order Changes boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page 2-126.
UEFI setup menu
2-123
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
