Note: If you select New Configuration, all data in the disks is lost.
Backup your required data before selecting New Configuration.
Tip:
•
When you click New Configuration, you lose the data in the existing
disk arrays. This should be selected when you discard the data in the
existing disk array and build a new one.
•
When you click New Configuration, the following window is displayed
first. Click Yes to build new disk array.
3. Click Manual Configuration > Next.
3-26
MegaRAID WebBIOS for LSI SAS 2008
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
