Table 3-14 Number of disks required
RAID level Number of disks required
RAID 0 (including JBOD) 1 or more
RAID 1 2
Tip: You can select only a disk which status is "Unconfigured Good"
(unused).
To select multiple disks, click the disks while pressing Ctrl key.
5. After selecting all disks to build a disk array, click Add To Array.
6. Status of those selected disks is Online as shown in the Drives
pane.
Click Accept DG.
3-28
MegaRAID WebBIOS for LSI SAS 2008
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
