Tip: Do not use Advanced Software Options and Events because they are
not supported.
Controller properties: menu for setting the disk array controller board
You can review the hardware information about the disk array controller
board.
Click Controller Properties from the main menu. The following Controller
Information window is displayed.
If you want to change the setting, click Next.
The following table shows description of menu items in the window.
Table 4-5 Controller properties menu items
Menu items Description
Serial Number Serial number
FRU Board names for maintenance
SubVendorID Sub-vendor ID
Drive Security Capable Physical drive security capability: Yes or No
SubDeviceID Sub-device ID
PortCount Number of installed ports
HostInterface Host interface
NVRAM Size Size of installed NVRAM
Firmware Version Firmware version
4-12
MegaRAID WebBIOS for storage expansion blades
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
