Hitachi Compute Blade 500 Series - Page 223

Menu items Description
Memory Size Size of installed memory
FW Package Version Firmware package version
Min Strip Size Minimum strip size
Firmware Time Current time that firmware recognizes
Max Strip Size Maximum strip size
WebBIOS Version MegaRAID WebBIOS version
Virtual Drive Count Existing number of array configurations (logical devices)
Drive Count Number of installed physical devices
Hot Spare Spin Down Disk spin-down mode set to HotSpare.
Unconfig Good SpinDown SpinDown setting mode for unused disks
Chips Temperature (Celsius) Chip temperature in Celsius
Tip: You cannot change the settings for those items displayed here.
Controller properties submenu 1
Click Next in the Controller Information
window. The following Controller
Properties window is displayed.
If you want to change the setting, select or input the value from the pulldown
menu. If you want to indicate another controller property, click Next.
MegaRAID WebBIOS for storage expansion blades
4-13
Hitachi Compute Blade 500 Series EFI User's Guide