Hitachi Compute Blade 500 Series - Page 30

Tip: EMPTY: DIMM is not installed in the DIMM slot.
Present, Enabled: DIMM is available.
System Security sub menu
Select an item to display or set on Trusted Platform Module (TPM 1.2), and
press Enter.
Tip:
•
Configure the following items when using TXT function.
– TPM Device: Enable
– TPM State: Activate
– TXT State: Enable
•
When using TXT function on Vmware, execute the following command at
boot.
#bootOption -o
The following table shows description of menu items appeared in the left side
of the window.
Select the item to display or set, and press Enter.
Table 2-9 System Security sub menu items
Menu items
Selection
1
Description
TPM Status
TPM Physical
Presence
- Displays the status of TPM Physical
Presence.
TPM Device State - Displays TPM Device State.
2-10
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide