Hitachi Compute Blade 500 Series - Page 29

Memory sub menu
Select the item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Table 2-8 Memory menu items
Menu items
Selection
1
Description
System Memory
Details
- Displays the status of each system
memory.
See System Memory Details on
page 2-9.
Total Memory Size - Displays the total memory size.
Memory Voltage - Displays the memory operating
voltage.
Memory Mode • <<Independent>>
• Mirroring
•
Sparing
Selects a memory operating mode.
Memory Speed • Force DDR3 800
• Force DDR3 1333
• <<Force DDR3 1600>>
Sets the memory clock frequency.
Memory Power
Management
• Disable
• <<Automatic>>
Sets Memory Power Management.
Socket Interleave • Non-NUMA
• <<NUMA>>
Sets a type of Memory Interleave.
Patrol Scrub • Disable
• <<Enable>>
Sets the patrol scrubbing which
proactively searches the memory
to repair correctable errors.
Memory Data
Scrambling
• Disable
• <<Enable>>
Sets the memory data scrambling.
Page Policy • Closed
• Open
• <<Adaptive>>
Sets the memory page policy.
Rank Margining Test • <<Disable>>
• Enable
Sets the memory rank margin
test.
Note:
1. A value in double angle brackets, << >>, shows the default.
System Memory Details
Select a processor and press Enter. Then, details of memory connected to
the processor.
UEFI setup menu
2-9
Hitachi Compute Blade 500 Series EFI User's Guide