Click ↓ key to show the following menu.
Menu items View/Setting Value/View/Reference
Apply Changes Applies settings. -
Mirror Data Size Virtual drive size -
Logical Sector Size Logical sector size 512 B
Segment Size Access size of the virtual
drive
64 KB
Starting Logical Block
Addressing (LBA)
Starting address of the
virtual drive
-
Protected Data protection No
Bad Blocks With or without Bad Blocks -
SSD Caching SSD cache setting Disabled
Access Access to the virtual drive Blocked / Read Only /
[<<Read/Write>>]
Current Write Cache
Policy
Current Write Cache Policy Write Through
Default Write Cache
Policy
Default Write Cache Policy Write Through
Disable Background
Initialization (BGI)
Background Initialization
setting
<<No (Background
Initialization Enabled)>> /
[Yes (Background
Initialization Disabled)]
Read Cache Policy Read Cache Policy No Read Ahead
Drive Cache Write Cache Policy on the
physical drive
[Disable] / Enable /
<<Unchanged>>
Input/Output (I/O) Read Cache operation setting Direct
Apply Changes Applies settings. -
3. Select a menu item to set, and change the value.
Drive Management: Physical drive management menu
You can display physical drive information; execute tasks; assign and
unassign hotspare, and display hotspare setting information.
1. Select Drive Management on the Main Menu window, and press Enter.
2. Drive Management window appears. Select a virtual drive to check
information and press Enter.
3. The physical drive information is displayed.
SAS 3004 iMR ROMB Configuration Utility
5-17
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
