Hitachi Compute Blade 500 Series - Page 326

Menu items View/description Value/view/reference
Operation Executes a task on the physical
drive.
Executing tasks on a physical
drive on page 5-18
Drive ID Physical drive ID number Port0 / Port1 / Port2 / Port3
Status Physical drive status Online / Offline / Unconfigured
Good / Unconfigured Bad /
Rebuild
Size Physical drive size -
Type Physical drive type Disk
Model Physical drive serial number -
Hardware Vendor Physical drive vendor -
Associated Virtual
Drive
Virtual drive associated with the
physical drive
-
Advanced… Advanced settings of the
physical drive
Changing advanced settings on
a physical drive on page 5-19
Executing tasks on a physical drive
Follow the steps below to execute tasks on a physical drive.
1. Select Operation, and press Enter.
2. The following appears in the middle of the window.
5-18
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide