Hitachi Compute Blade 500 Series - Page 441

The following table shows description of items in the window.
Table 7-2 Basic information items
Menu items Description Setting/display value
Adapter Displays the disk array controller name. Unchangeable
PCI Slot Displays a PCI slot number of the disk
array controller.
Unchangeable
PCI Address (Bus/
Dev)
Displays a PCI address of the disk array
controller.
Bus: bus number; Dev: device number
Unchangeable
MPT Firmware
Revision
Displays a firmware revision of the disk
array controller.
Unchangeable
Package Revision Displays a package revision of the disk
array controller.
Unchangeable
SAS Address Displays a SAS address of the disk array
controller.
Unchangeable
NVDATA Revision Displays an NVDATA revision of the disk
array controller.
Unchangeable
Status Displays status of the disk array
controller.
Unchangeable
Boot order Displays the boot order. Unchangeable
Boot Support Sets where to boot: from the
management BIOS of the disk array
controller or the OS.
<<Enabled BIOS &
OS>>/Disabled/Enabled
BIOS only/Enabled OS
only
1
Note:
1. When booting OS through LSI SAS 2004: Enabled BIOS & OS
When booting OS through LSI SAS 2208: Disabled
SAS configuration utility
7-7
Hitachi Compute Blade 500 Series EFI User's Guide