Note: Do not use other key functions unless instructed otherwise.
When booting OS through LSI SAS 2004 in the server blade, select "Enabled
BIOS & OS" on Boot Support of LSI SAS 2004. Confirm that Controller BIOS
of LSI SAS 2208 is selected to "Disabled". Perform following procedure for
setting Boot Support.
1. Select Boot Support.
2. Select Enabled OS only on Boot Support, and press ESC
key to exit the
menu.
7-8
SAS configuration utility
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
