Hitachi Compute Blade 500 Series - Page 63

Menu items
Selection
1
Description
Enable / Disable
Onboard Device(s)
- Enables or Disables onboard devices or slots.
Enable / Disable
Adapter Option ROM
Support
- Controls Legacy and UEFI-compliant adapter
support, Disabling UEFI/Legacy support may
adversely affect preboot/boot functions.
Set Option ROM
Execution Order
- Control legacy ROM load order (overridden
by UEFI thunk drivers).
PCIe Gen1/Gen2/
Gen3 Speed Selection
- Select this option to choose the
generation(Gen1/Gen2/Gen3 Speed)for
available PCIe slots.
Console Redirection
Settings
- Settings for Console Redirection and COM
Port Settings.
USB Configuration - USB Configuration Settings.
See USB Configuration on page 2-43.
Note:
1. A value in double angle brackets, << >>, shows the default.
USB Configuration
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window
Table 2-38 USB Configuration items
Menu items
Selection
1
Description
Front Dongle USB Port #1 • Disable
• <<Enable>>
USB Configuration Settings.
Front Dongle USB Port #2
• Disable
• <<Enable>>
USB Configuration Settings.
Front USB3.0 Port • Disable
• <<Enable>>
USB Configuration Settings.
XHCI Mode • Disable
• <<Auto>>
Configures the mode of USB 3.0
controllers.
Note:
1. A value in double angle brackets, << >>, shows the default.
Memory sub menu
Select the item to display or set, and press Enter.
UEFI setup menu
2-43
Hitachi Compute Blade 500 Series EFI User's Guide