Table 2-41 Recovery and RAS sub menu items
Menu items Selection Description
Advanced RAS - Sets the failure deconfiguration to CPU and
DIMM.
See Advanced RAS for details.
Backup Bank Management - Sets the backup management.
Disk GPT Recovery - Set the disk GPT recovery
System Recovery - Sets the system recovery.
Advanced RAS
Select an item to display or set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Select the item to display or set, and press Enter.
Table 2-42 RAS Configuration menu items
Menu items
Selection
1
Description
PCIe Isolation
2
• Disable
• <<Enable>>
Sets PCIe isolation.
Deconfigured Mode
• Disable
• <<Enable>>
Sets the Deconfigured mode.
POST Fail Retry • Disable
• <<Enable>>
Enable or Disable POST Fail Retry. POST Retry is
performed automatically when EFI firmware
detects any memory failure at POST.
Note:
1. A value in double angle brackets, << >>, shows the default.
2. These items are displayed but are not available.
Security sub menu
Place the cursor on a menu to set, and press Enter.
Note: Do not change the settings of other than the following items. If you
change the settings, UEFI may not start up.
•
Secure Boot Configuration
• Trusted Platform Module (TPM 1.2)
The following table shows description of menu items displayed in the left side
of the window.
Select a menu to set, and press Enter.
UEFI setup menu
2-49
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
