Hitachi Compute Blade 500 Series - Page 70

Table 2-43 RAS Configuration menu items
Menu items Selection Description
Rollback Configuration - Sets the rollback option.
Secure Boot Configuration - Sets the secure boot configuration.
Trusted Platform Module
(TPM 1.2)
- Displays TPM option setting window.
See
Trusted Platform Module (TPM 1.2) on
page 2-50 for details.
Trusted Platform Module (TPM 1.2)
Place the cursor on an item to set, and press Enter.
Note: Do not change the settings of the following item. If you change the
settings in a poor attempt, UEFI may not start up.
• MOR State
The following table shows description of menu items displayed in the left side
of the window.
Select an item to display or set, and press Enter.
Table 2-44 System Security sub menu items
Menu items
Selection
1
Description
TPM Status
TPM Physical
Presence
- Displays the status of TPM Physical
Presence.
TPM Device State - Displays TPM Device State.
MOR Status - Displays MOR (memory overwrite request)
status. This item is displayed with EFI
firmware version 04-00 or later.
Refresh TPM Status - Refreshes the display of TPM status.
TPM Settings
TPM Device • <<Disable>>
• Enable
Enables or disables TPM Device.
TPM State •
<<Deactivate>>
• Activate
Performs TPM Activation.
This item is only displayed when TPM
Device is Enable.
MOR State • <<Disable>>
• Enable
Enable or Disable MOR (memory overwrite
request). This item is displayed with EFI
firmware version 04-00 or later.
TPM Force Clear - Deletes the TPM data.
Note:
2-50
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide