Hitachi Compute Blade 500 Series - Page 89

Note: When booting from CD/DVD available in both UEFI mode and Legacy
mode, check Legacy Only. If not, the boot may be performed in UEFI mode.
Boot Modes sub menu
Select an item to set, and press Enter.
Note: For CB 520A A1, we guarantee OS boot only in Legacy mode. Thus, do
not change the following item.
• System Boot Mode
•
Driver Health Check
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
Table 2-61 Boot Modes sub menu items
Menu items
Selection
1
Description
System Boot
Mode
• <<UEFI and
Legacy>>
• UEFI Only
•
Legacy Only
Sets which Boot Manager uses to boot,
UEFI Driver or Option ROM.
UEFI Only: Uses UEFI Driver. Select this
for OS boot in UEFI mode.
Legacy Only: Uses Option ROM, not UEFI
Driver. Select this for OS boot in Legacy
mode.
UEFI setup menu
2-69
Hitachi Compute Blade 500 Series EFI User's Guide