Hitachi Compute Blade 500 Series - Page 90

Menu items
Selection
1
Description
UEFI and Legacy: Attempts to boot in
UEFI mode first. If the first attempt fails,
the second is performed in Legacy mode.
Optimized Boot • Enable
• <<Disable>>
Sets Optimized Boot where minimum
drivers are loaded to optimize the boot
time.
Quiet Boot
• <<Enable>>
• Disable
Sets Quiet Boot where the system
summary view is prevented.
Driver Health
Check
• <<All>>
• Onboard Only
• None
Sets a range for Driver Health Check.
Note:
1. A value in double angle brackets, << >>, shows the default.
System Event Logs
The System Event Logs of server blade are displayed.
User Security
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
Table 2-62 User Security menu items
Menu items Description
Set Power-On Password Sets a power-on password.
Clear Power-On Password Deletes a power-on password.
Set Admin Password Sets an administrator password.
Clear Admin Password Deletes an administrator password.
Note:
• Once a password is set, you need to enter the password when completing
the system boot or accessing Configuration/Setup menu. With
configuration of N+M, HA, or automatic bootup of OS, do not set a
password. If you do, password authentication interferes with switching
systems at failover; password authentication function interferes the
server blade startup. Thus, those processes cannot be completed
properly.
• A password must consist of 6 up to 20 any ASCII printable characters.
2-70
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide