What to do if pressing the start button starts Java VM, an error messages is shown and the remote console cannot be started or an earlier version one is started on Hitachi Compute Blade 500?
This may occur if the system console still has an earlier version of the Java application. To resolve this, select Control Panel > Java > General tab > Temporary Internet File > View, and delete all applications temporarily stored.
What to do if key remains pressed to the Hitachi Compute Blade 500 Server when using the remote console?
If a key remains pressed or is unavailable when using the remote console of your Hitachi Server, try focusing on another window with the mouse and then returning the focus to the remote console. If this does not work, end the remote console and then restart it.
Why is the message "The max number of session has been reached" displayed on my Hitachi Compute Blade 500 Server?
This message appears when another system console is already connected to your Hitachi Server. You can display the IP address of the already connected system console by using the "show blade bmc session" command in the CLI of the management module. To forcibly disconnect the session, use the "disconnect blade bmc session" command.
What to do if I can't use a remote CD/DVD, FD, or USB memory on my Hitachi Server?
If a remote CD/DVD, FD, or USB memory is not available on your Hitachi Server, end the remote console or virtual media console, and then restart it.
What to do if input is not available from the remote keyboard of Hitachi Compute Blade 500?
First, check if the server blade OS is in a state where key input is unavailable, such as due to Scroll Lock being enabled. If the problem persists, end the remote console and restart it.
What to do if the Hitachi Compute Blade 500 blade cannot be operated by the remote mouse?
Ensure that the mouse mode setting corresponds to the OS. If it does not, change the mouse mode setting. If this does not work, try changing the mouse mode to another one and then returning it to the correct mode. If the issue persists, end the remote console and restart it.
How to resolve issues with key status inconsistencies on Hitachi Compute Blade 500 Server?
To synchronize the CapsLock, NumLock, and ScrollLock keys between the server blade and system console on your Hitachi Server, inactivate the remote console window. Then, press the CapsLock, NumLock, and ScrollLock keys to change their states on the system console. This will align their states with those on the server blade.
What to do if USB keyboard is not available on Hitachi Compute Blade 500 remote console?
If the USB keyboard is not working on the remote console of your Hitachi Server, click the USB Reset button on the virtual media console to reset it.
How to fix Hitachi Server screen distortion in web console?
If the screen is distorted when operating the Hitachi Server blade Web console, click the Refresh icon of the Web browser to update the screen.
Why is the message "This application cannot be started." shown and the Hitachi Compute Blade 500 Server remote console cannot be started?
This message appears when the 'Keep temporary Internet files on your local computer' option is not selected in Java settings. To resolve this, go to Control Panel > Java > General tab > Temporary Internet File > Settings and click the check box.
Explains UEFI (Unified Extensible Firmware Interface) and its role for server blades.
Describes utilities for disk array configuration depending on model or RAID controller.
Provides step-by-step instructions on how to access the UEFI setup menu.
Provides instructions on how to launch the MegaRAID WebBIOS utility for storage expansion blades.
Describes the procedure for building new disk arrays for storage expansion blades.
Provides procedure for rebuilding disk arrays if physical drive failure occurs on storage blades.
Explains how to configure the hardware settings of the disk array controller.
Describes the procedure for creating virtual drives, including RAID 0 and RAID 1 configurations.
Provides procedures for deleting all virtual drives or specific virtual drives.
Provides steps to launch the LSI Software RAID Configuration Utility.
Details the procedures for initializing virtual drives using Fast or Full Initialization.
Provides procedures for deleting all virtual drives or specific virtual drives.
Describes how to rebuild RAID 1 virtual drives when a physical drive fails.
To Next Page
General