Hologic selenia dimensions - Chapter 1-General Information; 1.0 System Description; 2.0 Safety Information

P/N MAN-01964 Revision 001 1
DRAFT
Preview copy—Generated 7/9/2010
User Manual
Chapter 1—General Information
System Description
Chapter 1—General Information
1.0 System Description
2.0 Safety Information
Read and understand this manual before you use the system. Keep the manual available
during the patient procedures.
Always follow all the instructions in this manual. Hologic does not accept the responsibility
for injury or damage from wrong system operation. Hologic can arrange for training at your
facility.
The Selenia Dimensions has protective devices, but the Technologist must understand how
to safely use the system. The Technologist must remember the health hazards of x-rays.
2.1 General Safety
The Selenia Dimensions system is classified as CLASS I, TYPE B APPLIED PART, IPX0,
permanently connected equipment, continuous operation with short term loading per IEC
60601-1. There are no special provisions to protect the system from flammable anesthetics
or ingress of liquids.
WARNING! Lethal voltages exist inside of this system. Do not open any
of the panels.
Legend for Figure1-1
1. Gantry
2. C-arm
3. Acquisition Workstation
Figure 1-1: Selenia Dimensions