Configuring Alarms | 105
800-11873V4 - A - 07/2014
Note After making changes to your settings, it is advised to click Save and save your
settings. This can be done at any time, or multiple times during setup.
Setting a Periodical Event File Name
You can specify a file name format for images uploaded for the periodical event. Choose the
format that best meets your requirements.
1. In the File Name field (see Figure 6-17), type a file name (image.jpg is the default file
name).
2. Select one of the following options for the file name format:
• Add date/time suffix to add the date and time in YYMMDD_HHMMSS format (for
example, image130428_034724.jpg).
• Add sequence number suffix (no maximum value).
• Add sequence number suffix up to [number] and then start over, and enter a
value in the number field.
• Overwrite to overwrite an older file with a new file with a static filename.
Saving the Periodical Event Settings
After you have configured the periodical event settings, click Save. Make sure to click Save
before navigating to a different tab or option.
Save after you have configured all the periodical event settings. See Setting Up Periodical Event
and the Interval, page 103, Setting the Periodical Event Triggered Actions, page 104, and Setting
a Periodical Event File Name on page 105 for more information.
To Next Page
Loading...