Honeywell HDZ36EX - Figure 3-2 Right-Click Menu on Device Search Application; Figure 3-3 Device Network Setup Window

Accessing the Camera | 37
800-11873V4 - A - 07/2014
Figure 3-2 Right-Click Menu on Device Search Application
3. In the Network setup window (see Figure 3-3), select the Static IP Network Property
option.
4. Fill in the IP Address, Gateway, Netmask, and DNS fields, and then click Apply.
Note Contact your network administrator for advice on filling in the IP Address,
Gateway, Netmask and DNS fields.
Figure 3-3 Device Network Setup Window
5. Wait one minute for the new settings to take effect, and then click Device Search to
refresh the list of network cameras (see Figure 3-1).
Record the MAC address
for future reference
Note The
IP Relay
function is
reserved.
If a static IP address is
assigned, users can select
the DHCP option to assign
the PTZ camera a dynamic
IP address.