www.honeywell.com/security
64 | HDZ Series IP PTZ User Manual
b. In the Dwell time box, type a value from 0 (fast dwell time) to 127 (slow dwell time).
c. In the Speed box, type a value from 0 (low speed) to 14 (high speed).
To assign more preset points than the first 15 to the preset tour, click Next page. To return
to the previous page, click Pre page.
Figure 5-5 Preset Tour Selecting Preset Points
5. When you are finished programming the tour, click Save to save the preset tour settings
that you have entered.
Running a Preset Tour
1. Navigate to PTZ Preset Tour (see Figure 5-4).
2. Under Preset Tour run, in the Preset Tour line drop-down list, select the number of the
preset tour line that you want to run (from 1 to 8), and then click Go.
Note You can also run a preset tour on the home page of the PTZ web client interface
(see Figure 3-6 on page 41). Select a preset tour number from the Preset Tour
Details drop-down list and click Run to have the camera run the selected
programmed preset tour.
To Next Page
Loading...