www.honeywell.com/security
116 | HDZ Series IP PTZ User Manual
Figure 7-6 IEEE 802.1X Settings Screen
Enabling IEEE 802.1X
1. Navigate to System Security IEEE 802.1X (see Figure 7-6).
2. Contact your network administrator to obtain the following items:
• CA certificate: Required to authenticate the server
• Client certificate: Required to authenticate the IP camera
• Private key: Required to authenticate the IP camera
3. Upload the CA certificate, client certificate, and private key. Click Browse to locate the
certificate or key, then click Upload.
4. Under Settings, in the Identity field, type the user identity associated with the client
certificate. In the Private key password field, enter the password for the user identity.
5. Select the Enable IEEE 802.1X check box and click Save.
Setting Up an IP Filter
You can allow or deny specific IP addresses access to the camera. When the IP filter is enabled,
the IP addresses in the list will be allowed or denied access to the camera based on the filter
setting. To enable the IP filter:
1. Navigate to System
Security IP Filter (see Figure 7-7).
To Next Page
Loading...