www.honeywell.com/security
108 | HDZ Series IP PTZ User Manual
2. Use the Time zone drop-down list to select the time zone that the camera is installed in
from the list.
3. Click Save to confirm the setting.
Figure 7-1 System Configuration Screen
Enabling Daylight Saving Time
You have the option of enabling daylight saving time (DST) for the camera, allowing the camera
to automatically adjust the internal clock with the daylight saving time changes.
1. Navigate to the System tab
System (see Figure 7-1).
2. Select the Enable daylight saving time check box to enable DST and the DST options.
3. Enter the DST time offset in the time offset field. The format for time offset is [hh:mm:ss].
For instance, if the amount of time offset is one hour, enter 01:00:00 in the field.
4. Setup dates for daylight saving time changes to take effect in the Start date and End date
fields. The start date is the date daylight saving begins. The end date is the date that
daylight saving ends for the year.
To Next Page
Loading...