www.honeywell.com/security
36 | HDZ Series IP PTZ User Manual
1. Insert the installation disc into your disc drive and navigate to the Honeywell Device
Search folder.
2. Double-click the Honeywell Device Search icon to run the application on your
computer.
3. Copy the Honeywell Device Search executable file to your computer desktop (or other
location) to run the Honeywell Device Search without using the installation disc.
4. Launch the Honeywell Device Search application and click Device Search to search for
cameras on the network (see Figure 3-1).
All IP cameras discovered on the network are displayed.
Figure 3-1 Honeywell Device Search Application
Assigning a Static IP Address to the Camera
Note The camera comes with the IP address set as DHCP/APIPA by default. It is not
required to switch to a static IP address. Users may choose to keep the default
DHCP/APIPA assigned IP address.
If required, you can assign a static (fixed) IP address to the camera. To assign a static IP
address:
1. Launch the Honeywell Device Search application and click Device Search (see
Figure 3-1).
2. Right-click the camera that you want to assign a static IP address, and click Network
Setup. Make a note of the camera’s MAC address for future reference (see Figure 3-2).
To Next Page
Loading...