www.honeywell.com/security
66 | HDZ Series IP PTZ User Manual
Figure 5-6 Sector Programming
Enabling or Disabling the Sector Function
1. Navigate to PTZ Sector (see Figure 5-6).
2. Under Sector setting, in the Switch drop-down list, select one of the following:
• On to enable the sector function.
• Off to disable the sector function.
3. Click the Set button located below the Switch field to save the settings that you have
entered for the Sector Function.
Home Function
The home function ensures constant and consistent monitoring by preventing the camera from
idling for more than a set period of time. When the home function is enabled, the camera
automatically executes a user-defined PTZ function after a specific period of inactivity.
Programming the Home Function
1. Navigate to PTZ Home (see Figure 5-7).
To Next Page
Loading...