www.honeywell.com/security
112 | HDZ Series IP PTZ User Manual
An administrator can create up to 20 user accounts. Each user can be assigned one or more of
the following privileges (see Table 7-1).
Adding a New User
1. Navigate to System Security User (see Figure 7-2).
2. Under Add User, type the User name and User password in the corresponding fields.
Note Do not use spaces in user names or passwords. Any of the following characters
may be used: A–Z, a–z, 0–9, !@#$%^’&-_~.
3. Select the check boxes for each of the privileges to give the new user (see Table 7-1 for
more information on user privileges).
4. Click Add to save the settings for the new user. The new user information will display in the
User information window below after clicking get user information (see Figure 7-2).
Editing a User
1. Navigate to System Security User (see Figure 7-2).
2. Under Manage User, in the User name drop-down list, select the user you want to edit the
password or privileges for, and then click Edit.
3. A window opens in which you can change the privileges and/or password for the selected
user. Change the parameters, as needed.
4. Click Save to save the updated settings for that user.
Deleting a User
1. Navigate to System Security User (see Figure 7-2).
2. Under Manage User, in the User name drop-down list, select the user you want to delete,
and then click Delete.
Table 7-1 User Privileges
Privilege Description
I/O access User can view video, and input/output information when
accessing the camera.
Camera control User can change certain camera parameters.
Talk User can talk (transmit audio) to other sites.
Listen User can listen (receive audio) from other sites.
To Next Page
Loading...