www.honeywell.com/security
44 | HDZ Series IP PTZ User Manual
On-Screen Display
Figure 3-8 shows the layout of the web client interface with the on-screen display active and
displaying the relevant information. See Setting the Text Overlay on page 47 for more information
on the on-screen display options.
Figure 3-8 HDZ Series Camera Browser On-Screen Display
Mimic Tour
Controls
Mimic Tour Run: Select the Mimic Tour line that you want to run with the drop-down list
provided (select from tour 1 to 8) and click Run to start the tour (see Figure 3-6). The camera
will start touring around, mimicking the line that was previously programmed (see Mimic Tour
Settings on page 59 for information on setting up a Mimic Tour).
Mimic Tour Stop: To stop the Mimic Tour, you can either click Stop or move the camera in any
direction with the pan/tilt/zoom controls provided.
Preset Tour
Controls
Preset Tour Run: Select the Preset Tour path that you want to run with the drop-down list
provided (select from tour 1 to 8) and click Run to start the tour (see Figure 3-6). The camera
will start touring around on the path that was previously programmed (see Preset Tour Settings
on page 63 for information on setting up a Preset Tour).
Preset Tour Stop: To stop the Preset Tour, you can either click Stop or move the camera in
any direction with the pan/tilt/zoom controls provided.
PTZ Speed Select the speed at which the camera pans and tilts at when using the control wheel/panel.
Select the speed value with the drop-down list provided and click Set. Select the PTZ Speed
from between 1 and 10. The higher the selected number, the faster the camera will move when
using the pan/tilt controls. The speed of the camera when clicking and dragging on an image
area will remain unchanged.
Table 3-4 PTZ Controls and Functions (cont’d)
Control Description
User-defined
text string
Event
message
Pan/tilt
direction and
degree
Zoom ratio
Date and
time display
To Next Page
Loading...