Configuring PTZ Settings | 81
800-11873V4 - A - 07/2014
Note This image flip function is automatically disabled when the privacy mask function
is enabled. However, the M.E. image flip function (mechanical image flip
function) can be used when the privacy mask function is enabled (see Privacy
Mask Settings on page 69 for more information).
Note Flip setting is manually controlled ONLY. If a preset position or point for another
function (such as mimic tour) is set in a position that can only be reached through
Flip motion, that position can not be reached when the Flip function is disabled.
Digital Zoom
You can enable the camera to perform digital zooming (zooms on an image past the optical
zoom ability):
1. Navigate to PTZ
Camera.
2. Under Misc (see Figure 5-13), in the Digital zoom drop-down list, select either On (to
enable digital zooming) or Off (to disable digital zooming).
3. Click Set to save the setting.
Speed by Zoom
The speed by zoom function lets you view objects clearly while zooming in. As the camera
zooms in, the pan and tilt speed slow proportional to the amount of zoom, causing the scene to
remain in focus throughout zooming.
Enable this function to adjust the pan/tilt speed automatically by internal algorithm when
zooming. The larger zoom ratio leads to a lower rotating speed.
Enabling/Disabling the Speed by Zoom Function
1. Navigate to PTZ Camera.
2. Under Misc (see Figure 5-13), in the Speed by zoom drop-down list, select one of the
following options:
• On (default) to enable the speed by zoom function.
• Off to disable the speed by zoom function.
3. Click Set to save the setting.
To Next Page
Loading...