Configuring PTZ Settings | 63
800-11873V4 - A - 07/2014
Preset Tour Settings
You can program up to eight preset tours that can consist of between 2 and 64 preset points in
each tour.
Note You must define at least two presets before you can program a preset tour.
See Preset Settings on page 57 for more information on programming preset
points.
Programming a Preset Tour
1. Navigate to PTZ Preset Tour.
2. Under Preset Tour setting, click Edit (see Figure 5-4). The Preset Tour Set window opens
(see Figure 5-5).
Figure 5-4 Preset Tour Programming
3. On the Preset Tour Set page (Figure 5-5), in the Preset Tour line drop-down list, select
the number of the preset tour that you want to program (from 1 to 8).
4. For each preset that you want to assign to the preset tour, do the following:
a. In the Name drop-down list, select the name of the preset point to be part of the tour
(see Figure 5-5).
To Next Page
Loading...