www.honeywell.com/security
132 | HDZ Series IP PTZ User Manual
Figure 7-18 Storage Management - Network Share Settings Screen
Managing Disk Cleanup Settings
1. Navigate to System Storage Management Network Share (see Figure 7-18).
2. Select the Enable automatic disk cleanup check box in the Disk cleanup setting area of
the screen (Off is the default disk cleanup setting).
3. In the Remove recordings older than fields, enter how long you want the recordings to
remain on the Network attached storage device (the default setting is 1 day).
4. In the Remove oldest recordings when disk is [percentage] % full field, enter a
percentage value between 1 and 99 for how full the Network attached storage device will
get before recordings are removed (the default setting is 85%).
5. Click Save.
To Next Page
Loading...