Configuring Alarms | 91
800-11873V4 - A - 07/2014
Note If you select By schedule, you will also need to select the schedule(s) to be used
for this selection. Click on the Please select field and select the check box for
each schedule to be used.
2. In the Alarm type drop-down list, select one of the following options:
• Normal open; for the alarm to trigger when the contact is closed (default setting).
• Normal close; for the alarm to trigger when the contact is opened.
Note After making changes to your settings, it is advised to click Save and save your
settings. This can be done at any time, or multiple times during setup.
Figure 6-5 Alarm Input Parameters
To Next Page
Loading...