Configuring PTZ Settings | 75
800-11873V4 - A - 07/2014
Figure 5-11 Exposure Mode Programming
Setting a Max Gain Value
Note This feature is only supported by the HDZ PTZ models: HDZ20HD(X),
HDZ20HDE(X), HDZ30HD, and HDZ30HDE.
Note The gain limit can be set at the Full Auto, P-Iris Priority, Shutter Priority, and Iris
Priority in the AE mode. Use this setting when image signal-to-noise ratio is
particularly important.
1. Navigate to PTZ Camera (see Figure 5-11).
2. Under Exposure Mode, use the Max Gain drop-down list to select a max gain value for
the camera (from 3dB to 57dB, or Off).
3. Click Set to save the max gain value you have selected.
To Next Page
Loading...