www.honeywell.com/security
62 | HDZ Series IP PTZ User Manual
Figure 5-3 Auto Pan Programming
6. In the Direction drop-down list, select a direction for the auto pan path to run (Left or
Right).
7. In the Live View screen, use the mouse to click and drag the video image to the end point
of the auto pan path, and then click the Set button located next to End point.
Running an Auto Pan Path
1. Navigate to PTZ Auto Pan (see Figure 5-3).
2. Under Auto pan run, in the Auto pan path drop-down list, select the number of the auto
pan path that you want to run (from 1 to 4), and then click Run.
Stopping a Running Auto Pan Path
In the Live View screen, use the mouse to click and drag the pointer to move the camera in any
direction to stop auto panning.
Deleting an Auto Pan Path
1. Navigate to PTZ Auto Pan (see Figure 5-3).
2. Under Auto pan run, in the Auto pan path drop-down list, select the number of the auto
pan path that you want to delete (from 1 to 4), and then click Delete.
To Next Page
Loading...