www.honeywell.com/security
124 | HDZ Series IP PTZ User Manual
Figure 7-11 Windows Components Wizard Dialog Box
4. In the Networking Services dialog box (see Figure 7-12), in the Subcomponents of
Networking Services window, select the UPnP User Interface check box, and click OK.
Figure 7-12 Networking Services Dialog Box
5. Click Next to install the UPnP User Interface, and then click Finish.
Note When UPnP port forwarding is enabled, the camera can open the web server port
on a UPnP-enabled router automatically.
Enabling UPnP Port Forwarding
1. Navigate to System Network UPnP (see Figure 7-13).
To Next Page
Loading...