www.honeywell.com/security
38 | HDZ Series IP PTZ User Manual
Accessing the Camera from a Browser
Before accessing the camera, you may need to enable ActiveX settings.
Enabling Internet Explorer ActiveX Settings
To enable Internet Explorer ActiveX settings:
1. Launch Internet Explorer.
2. Open the Tools menu, and click Internet Options.
3. Select the Security tab, and click Custom level.
4. Scroll down the Security Settings list until you see the ActiveX controls and plug-ins
settings section.
5. Scroll down to Automatic prompting for ActiveX controls, and select Enable.
6. Scroll down to Download signed ActiveX controls, and select Enable or Prompt.
7. Scroll down to Run ActiveX controls and plug-ins, and select Enable or Prompt.
8. Scroll down to Script ActiveX controls marked safe for scripting, and select Enable or
Prompt.
9. Click OK, and then click OK again on the Internet Options window.
10. Close and re-launch Internet Explorer for the new settings to take effect.
Accessing the Camera from a Browser
1. Do one of the following to access the camera in a browser:
• Find the camera that you want to access using Honeywell Device Search and
double-click it, or right-click it and then click Browse (see Figure 3-2).
• Type the IP address of the camera that you want to access in the address bar of your
web browser.
2. At the prompt, type the default user name and password (case sensitive) to access the
camera (see Figure 3-4).
• The default user name is admin.
• The default password is 1234.
3. Click OK.
Note If users have been added or modified, be sure to use the user name and
password that has been assigned.
To Next Page
Loading...