www.honeywell.com/security
78 | HDZ Series IP PTZ User Manual
Setting the White Balance Mode
1. Navigate to PTZ Camera.
2. Under White balance (see Figure 5-12), select one of the following:
• Auto to enable auto white balance mode.
• Indoor to enable indoor white balance mode.
• Outdoor to enable outdoor white balance mode.
• ATW to enable auto tracing white balance mode.
• One Push to enable the One Push white balance mode. Choose One Push and click
Set to save the selection. Then point the camera to a typical white balance scene for
that camera and click Trigger to fix the current while balance value. The white
balance algorithm does not keep working after the trigger button is clicked.
• Manual to enable manual white balance mode, and enter gain values from 0 to 255 in
the Rgain and Bgain fields.
3. Click Set to save the white balance settings that you have entered.
Backlight Compensation
You can enable or disable backlight compensation. When enabled, the camera software will
automatically compensate for high background lighting.
Enabling/Disabling Backlight Compensation
1. Navigate to PTZ Camera.
2. Under Misc (see Figure 5-13), in the BLC drop-down list, select one of the following
options:
• On to enable backlight compensation.
• Off (default) to disable backlight compensation.
3. Click Set to save the setting.
To Next Page
Loading...