www.honeywell.com/security
68 | HDZ Series IP PTZ User Manual
2. Under Home setting, in the Switch drop-down list, select one of the following:
• On to enable the home function.
• Off to disable the home function.
3. Click the Set button located below the Switch field to save the settings that you have
entered for the Home Function.
Tilt Range Settings
The camera’s tilt angle is adjustable from minimum –10° to maximum 100°.
For more information, see Image Flip on page 80.
Adjust the Tilt Angle
1. Navigate to PTZ Tilt Range (see Figure 5-8).
2. Under Angle Setting, in the Min field, type a value from –10 to 10. The default value is 0.
3. In the Max field, type a value from 80 to 100. The default value is 90.
Note When you select Image Flip from the PTZ Camera Flip, the Max field value
range will be from 170 to 190. Default value is 180.
4. Click Set to save the settings that you have entered for the Tilt Angle.
To Next Page
Loading...