www.honeywell.com/security
70 | HDZ Series IP PTZ User Manual
Privacy Mask Settings on 1080p PTZ Cameras
The privacy mask functions in the following sections only apply to HDZ20HD(X), HDZ20HDE(X),
HDZ30HD, and HDZ30HDE model cameras.
Creating a Privacy Mask
1. Navigate to PTZ Privacy Mask (see Figure 5-9).
2. Under Mask Setting, in the Switch drop-down list, select On to enable the privacy mask
function (or select Off to disable the privacy mask feature), and then click the Set button
located directly below the drop-down list.
3. In the Transparency drop-down list, select one of the following:
• On to make the privacy mask transparent.
• Off to make the privacy mask solid.
4. In the Color drop-down list, select a color for the privacy mask (Black, White, Red,
Green, Blue, Cyan, Yellow, and Magenta), and then click the Set button located directly
below the Color drop-down list.
Figure 5-9 Privacy Mask Programming (1080p PTZ Version)
5. In the Live View screen, use the mouse to click and drag the video image to the video
position to be masked for privacy. To re-position the camera, place the mouse cursor over
the video image and left-click and drag in the direction you want to move the camera. The
red arrow icon ( ) indicates the direction that the image will pan/tilt. When you add
the privacy mask (see step 9), the privacy mask will be added to the center of this image.
6. In the Mask field, type a number for the privacy mask you are programming (from 1 to 16).
7. Use the mouse to click and drag from the middle of the mask to re-position it, as needed.
To Next Page
Loading...