www.honeywell.com/security
50 | HDZ Series IP PTZ User Manual
Setting the Video Compression
You can set the compression level (or quality) for each type of video stream: Motion JPEG,
H.264-1, H.264-2, H.264-3, and H.264-4. Higher bit rates produce higher quality images but
require more bandwidth to transmit the images.
Setting the MJPEG Compression
1. Navigate to Streaming Video Compression (see Figure 4-2).
2. Under MJPEG Compression setting, in the MJPEG Q factor field, type a value from 1 to
70 (default = 35).
The higher the value, the bit rate and image quality increases, and the load on bandwidth
also increases.
3. Click the Save button directly below the MJPEG Compression setting options.
Figure 4-2 Video Compression Settings
Setting the H.264-1 Compression
1. Navigate to Streaming Video Compression.
2. Under H.264-1 Compression setting, in the H.264-1 bit rate field, type a value from 64 to
4096 kbit/s (default = 4096 kbit/s).
To Next Page
Loading...