Accessing the Camera | 39
800-11873V4 - A - 07/2014
Figure 3-4 Camera Browser Login
Installing and Using Honeywell Viewer for the First Time
The first time you access an HDZ Series IP PTZ camera, a client program, the Honeywell Viewer,
will be automatically installed to your PC when connecting to the camera. If the web browser
doesn’t allow the Honeywell Viewer to install, please check the Internet security settings or
ActiveX controls and plug-in settings to continue the process (see Enabling Internet Explorer
ActiveX Settings on page 38).
1. After you have connected to the camera, a request to install an ActiveX control will appear
on the browser’s information bar. Right-click the information bar and then click Allow
ActiveX control to install the ActiveX control.
2. The Security Warning window will appear (see Figure 3-5). Click Install to start the
Honeywell Viewer software installation.
Figure 3-5 Software Installation Security Warning
3. Click Finish to close the installation window once the download and installation is
complete.
To Next Page
Loading...